YouTube - Videos about Apple gear & tech worth caring about.

How to Screen Record on Mac, With Sound at Last

Lewis Lovelock
Lewis Lovelock··8 min read
L

For years, the honest answer to how to screen record on Mac came with an asterisk. The picture was easy: one shortcut and you were recording. The sound coming out of your Mac was not, and every guide eventually sent you off to install a free audio driver and fiddle with Audio MIDI Setup.

That changed with macOS 27 Golden Gate. There is now a single tick box that records system audio, and most of the pages ranking for this question still tell you it doesn't exist. Here is the whole process, what the new option does and doesn't capture, and what to do if your Mac can't run macOS 27.

How to screen record on Mac with Shift-Command-5

The built-in route is the Screenshot app, and the fastest way to it is Shift-Command-5. Apple's own guide to recording the screen on Mac walks through it, and the short version looks like this.

  • Press Shift, Command and 5 together. A toolbar appears along the bottom of the screen.
  • Pick a recording mode. Record Entire Screen, Record Selected Portion, and on macOS Tahoe 26 or later, Record Selected Window.
  • Click Options and set your audio, timer and save location before you start. More on this below, because it is where most recordings go wrong.
  • Click Record. If you chose Selected Window, click the window you want.
  • To stop, click the Stop button in the menu bar, or press Command-Control-Esc.

Press Esc at any point before you hit Record to cancel without creating a file. If you already use this toolbar for stills, the layout will be familiar, and my guide to how to screenshot on Mac covers that side, including the Shift-Command-6 clash with the new Siri.

Record Selected Window is the mode to use

Selected Window arrived with macOS Tahoe and it is the one I now default to. It follows a single app window and ignores everything around it, so a notification sliding in from the corner or a stray browser tab never ends up in the clip.

Selected Portion is the older compromise. You drag a rectangle, and anything that wanders into that rectangle gets recorded, including other windows if you move things around mid-take.

The Options menu: where screen recordings go wrong

Nearly every 'my recording is silent' or 'where did my file go' problem traces back to the Options menu, which hides behind a small label on the toolbar. These are the settings that matter.

  • Microphone. Choose a microphone to narrate, or None to record no voice at all. Your choice sticks for next time, which is how people end up narrating into nothing.
  • Include System Audio. The new one. Only present on macOS 27 Golden Gate or later.
  • Save to. Recordings go to the desktop by default. Point them at a folder if your desktop is already a mess.
  • Timer. A delay of five or ten seconds gives you time to close the toolbar's own clutter and get into position.
  • Show Mouse Clicks. Draws a black circle around the pointer whenever you click, which helps anyone following a tutorial.
  • Capture Format. On supported Macs running Tahoe or later, SDR saves as H.264 for compatibility and HDR saves as HEVC.

That last one catches people out. If you send an HDR recording to someone on an older Windows laptop or upload it somewhere that doesn't handle HEVC well, it can play back washed out or not at all. Unless you specifically need HDR, leave it on SDR.

How to screen record on Mac with audio in macOS 27

This is the part most guides haven't caught up with. Open Shift-Command-5, click Options, and tick Include System Audio. That records whatever your Mac is playing, alongside your microphone if you have one selected, into the same file.

Before Golden Gate, the Screenshot app recorded only microphone input. Apple's support page now lists the system audio option as macOS 27 or later, and MacGeneration's write-up of the change confirms it lands in the same Options menu as the microphone setting.

If you run both at once, use headphones. Recording system audio and a microphone through the Mac's own speakers means the mic picks the speakers back up, and you end up with an echo on every sound effect.

What the new system audio option still won't do

Two limits are worth knowing before you build a workflow around it. First, according to MacGeneration, the audio is saved as AAC at 128 kb/s. That is fine for a software demo or a bug report, but it is not the way to capture music cleanly.

Second, protected video is still protected. Apple's page notes that some apps, such as the Apple TV app, may not let you record their windows, and streaming services behave the same way. MacGeneration reports that the audio from those sources can still come through, which means you can end up with a file that has sound over a black picture. Your Mac isn't broken: that's copy protection working as designed, the same thing that blacks out protected video when you screen record on iPhone.

How to screen record on Mac with sound on Tahoe or an Intel Mac

Not every Mac gets the tick box. macOS 27 dropped Intel Macs entirely, and plenty of Apple silicon owners haven't updated yet. On macOS Tahoe or earlier, Screenshot and QuickTime still record the microphone only, so you need a workaround.

The one most people land on is BlackHole, a free virtual audio driver. It creates a new audio device that your Mac can send sound to and the recorder can listen to. The setup takes five minutes and you only do it once.

  • Install BlackHole, then open Audio MIDI Setup from Applications, then Utilities.
  • Click the plus button in the bottom-left corner and create a Multi-Output Device. Tick both your speakers or headphones and BlackHole, so you can still hear what you're recording.
  • Set that Multi-Output Device as your sound output in System Settings, Sound.
  • Open Shift-Command-5, click Options, and choose BlackHole as the microphone.

There are two catches. You can't narrate and capture system audio this way without a more involved aggregate device, and the volume keys stop working while a Multi-Output Device is your output. Switch back to your normal speakers when you finish, or you'll spend ten minutes wondering why the volume slider does nothing.

If that's more fiddling than you want, OBS Studio is free, records system audio with its own capture, and is what a lot of people on Reddit suggest instead. It's overkill for a 30-second clip, but if you record your screen every week it's worth learning.

Using QuickTime Player to record your screen

QuickTime is the other built-in option, and on current macOS it mostly hands you straight back to the Screenshot toolbar. Open QuickTime Player, choose File, then New Screen Recording, or press Control-Command-N. On a recent Mac, that opens the same Shift-Command-5 controls.

The one advantage QuickTime has is what happens afterwards. It opens the recording automatically so you can play, trim and share it straight away, whereas the Screenshot app leaves the file wherever you told it to save. Apple's page only lists a microphone for QuickTime, not system audio, so for sound on macOS 27, use the Screenshot app's tick box.

Where screen recordings go on Mac, and how to trim them

By default, recordings save to your desktop with a name like 'Screen Recording' followed by the date and time, as a .mov file. If you changed Save to in Options, look there instead.

Right after you stop, a thumbnail appears in the bottom-right corner for a few seconds. Click it to trim the start and end without opening another app. Every recording begins with you reaching for the toolbar and ends with you reaching for Stop, so there's almost always a second of junk to cut from each end.

Watch the file sizes. A long full-screen recording on a high-resolution display gets large quickly, and if your desktop syncs to iCloud Drive, that file uploads like everything else. Save to a local folder if you're recording anything long.

Screen recording on Mac: common questions

How do I screen record on Mac with audio?

On macOS 27 Golden Gate or later, press Shift-Command-5, click Options and tick Include System Audio, then choose a microphone if you also want your voice. On macOS Tahoe or earlier, the built-in tools record the microphone only, so you need a virtual audio driver such as BlackHole or an app like OBS Studio.

How do I stop a screen recording on Mac?

Click the Stop button in the menu bar at the top of the screen, or press Command-Control-Esc. The same shortcut works for recordings started from the Screenshot app and from QuickTime Player.

Why is my Mac screen recording black?

The app you recorded blocked it. Apple notes that some apps, such as the Apple TV app, may not let you record their windows, and streaming services protect their video the same way. There's no setting to change: it's copy protection, not a fault.

My take

For most people, the answer to how to screen record on Mac is now the same three steps: Shift-Command-5, Record Selected Window, and a quick look at Options before you press Record. On macOS 27, that Options menu finally includes system audio, which retires a workaround that has been in every guide for the best part of a decade.

If your Mac is on Tahoe or it's an Intel machine, BlackHole still does the job, as long as you remember to switch your output back afterwards. And if a recording comes back black, stop troubleshooting. That's the app protecting its video, and nothing on your Mac will change it.

Source: How to record the screen on Mac, Apple Support

The Lovelock Log

Monthly notes on the tech I actually use, the tools I am building, and what is working. No spam.